Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Group
Mask
Syntax
MASK:USER:BITRate <NR1>
MASK:USER:BITRate?
Arguments
<NR1> is a number that sets the bit rate of the user mask in bits per second.
Examples
MASK:USER:BITRATE 156E6 sets the bit rate.
MASK:USER:BITRATE? might return :MASK:USER:BITRATE 1560000,
indicating that the bit rate of the user mask is set to 1560000 bits per second.
MASK:USER:HSCAle
This command sets or returns the nominal timing resolution u sed to draw the
mask, in time/division. The query form of this command returns the nominal
timing resolution of the displayed mask. The set form of this command only
affects the user mask, regardless of the current (displayed) m ask.
Group
Mask
Syntax
MASK:USER:HSCAle <NR3>
MASK:USER:HSCAle?
Rel
ated Commands
MASK:USER:HTRIGPOS
Arguments
<NR3> is a floating point number that sets the mask drawing timing resolution.
Examples
MASK:USER:HSCALE 200E–9, sets the no
minal timing resolution used to draw
the mask to 200 nanoseconds per division.
MASK:USER:HSCALE? might return :MA
SK:USER:HSCALE 40.0000E–9
,
indicating that the nominal timing resolution used to draw the mask pulse shape
is set to 40 nanoseconds per division.
MASK:USER:HTRIGPOS
This command sets or returns the nominal trigger position (pulse leading edge)
used to draw the mask as a fraction of the display width. The query form of
this command returns the nominal
trigger position of the displayed mask. The
2-336 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English