Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
HORIZONTAL:FA
STFRAME:XZERO:FRAME:REF1? 3
might return
:HORIZONTAL:FASTFRAME:XZER O:FRAME:REF1 3,3.8285E-9, indicating
the time from the trigger to the start of frame 3 on Reference 1 is 3.83 ns.
HORizontal:FASTframe:XZEro:REF? (Query Only)
This command sets or queries the time from the trigger to the trigger sample on
the reference waveform.
Group
Horizontal
Syntax
HORizontal:FASTframe:XZEro :REF?
Examples
HORIZONTAL:FASTFRAME:XZERO :REF1? might return
:HORIZONTAL:FASTFRAME:XZER O:REF 35.1000E-12, indicating
that the Reference 1 waveform trigger sample occurred 35.1 ps after the trigger.
HORizontal:FASTframe:XZEro:SELECTED:CH<x>? (Query Only)
This command sets or queries the time from the trigger to the trigger sample on
the selected c hannel. CH<x> can be CH1, CH2, CH3, or CH4.
Group
Horizontal
Syntax
HORizontal:FASTframe:XZEro :SELECTED:CH<x>?
Examples
HORIZONTAL:FASTFRAME:XZERO :SELECTED:CH1? might return
:HORIZONTAL:FASTFRAME:XZER O:SELECTED:CH1 35.1000E-12, indicating
that the selected Channel 1 trigger sample occurred 35.1 ps after the t rigger.
HORizontal:FASTframe:XZEro:SELECTED:REF<x>? (Query Only)
This command sets or queries the time from the trigger to the trigger sample on
the selected reference waveform. REF<x> can be REF1, REF2, REF3, or REF4.
Group
Horizontal
Syntax
HORizontal:FASTframe:XZEro :SELECTED:REF<x>?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-255

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English