Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
TRIGger:A:SE
RIAL:CLOCk:LEVel
This command sets or queries the serial trigger clock level.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:SERIAL:CLOCk:LE Vel <NR3>
TRIGger:A:SERIAL:CLOCk:LE Vel?
Arguments
<NR3> is a value in the range of 9.9E37 and i s expressed in volts.
Examples
TRIGGER:A:SERIAL:CLOCK:LE VEL 0.0 sets the clock level to 0 V.
TRIGGER:A:SERIAL:CLOCK:LE VEL? might return
:TRIGGER:A:SERIAL:CLOCK:L EVEL 51.8400E+6, indicating that the
32.0000E-3 indicating that the serial trigger clock level is set to 51.84E6 volts.
2-580 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English