Commands Listed in Alphabetical Order
<NR1> =0turnso
ff mask margins; any other integer turns on the selected mask
margins.
Examples
MASK:MARGIN:STATE ON turns on mask margins.
MASK:MARGIN:STATE? might return :MA SK:MARGIN:STATE 1, indicating that
the mask margins are on.
MASK:MASKPRE:AMPlitude
This command sets or returns the current mask’s nominal pulse amplitude in
volts. The query form of this command returns the nominal pulse amplitude
of the displayed mask. The set form of this command only affects the current
(displayed) mask.
Group
Mask
Syntax
MASK:MASKPRE:AMPlitude <NR3>
MASK:MASKPRE:AMPlitude?
Related Commands
MASK:MASKPRE:VSCAle
Arguments
<NR3> is a floating number that sets the nominal pulse amplitude in volts.
Examples
MASK:MASKPRE:AMPLITUDE 2.4 sets the current mask nominal pulse amplitude
to 2.4 volts.
MASK:MASKPRE:AMPLITUDE? might return :MASK:MA SKPRE:AMPLITUDE 1,
indicating that the current mask’s nominal pulse amplitude is set to 1.0 V.
MASK:MASKPRE:HSCAle
This command sets or returns the nominal timing resolution u sed to draw the
mask, in time/division. The query form of this command returns the nominal
timing resolution of the displayed mask. The set form of this command only
affects the current (displayed) mask.
Group
Mask
2-308 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
