Commands Listed in Alphabetical Order
Group
Low Speed Seria
l Trigger
Syntax
TRIGger:A:I2C:FORMat {BINary|HEX}
TRIGger:A:I2C:FORMat?
Arguments
BINary specifies binary format for I2C triggering.
HEX spec ifies hexadecimal format for I2C triggering.
Examples
TRIGGER:A:I2C:FORMAT HEX sets the I2C trigger format to hexadecimal.
TRIGGER:A:I2C:FORMAT? might return :TRIGGER:A:I2C:FORMAT BINARY,
indicating that the I2C trigger format is set to binary.
TRIGger:A:LOGIc? (Query Only)
This query-only command returns all of the logic trigger parameters.
Group
Trigger
Syntax
TRIGger:A:LOGIc?
Related Commands
TRIGger:{A|B}:LOGIc:CLAss
Examples
TRIGGER:A:LOGIC? might return :TRIGGER:A:LOGIC:CLASS
PATTERN; FUNCTION AND; WHEN TRUE; THRESHOLD:CH1 1.4000;CH2
1.4000;CH3 1.4000; CH4 1.4000;:TRIGGER:A:LOGIC:INPUT:CH1
HIGH; C H2 X;CH3 X; :TRIGGER:A:LOGIC:PATTERN:INPUT:CH4
X; :TRI GGER:A:LOGIC:PA TTERN:WHEN TRUE;
WHEN:LESSLIMIT 5.0000E-9; MORELIMIT
5.0000E-9; :TRIGGER:A:LOGIC:SETHOLD:CLOCK :EDGE
RISE; T HRESHOLD 1.4000;SOURCE CH2;
:TRIGGER:A:LOGIC:SETHOLD: DATA:THRESHOLD 1.4000;SOURCE
CH1; :T RIGGER:A:LOGIC: SETHOLD:HOLDTIME2.0000E-9; SETTIME
3.0000E-9; :TRIGGER:A:LOGIC:STATE:INPUT:C H4 RISE;
:TRIGGER:A:LOGIC:STATE:WH EN TRUE
.
TRIGger:A:MODe
This command sets or queries the A trigger mode. This command is equivalent to
selecting Mode from the Trig menu and then choosing the desired Trigger Mode.
2-574 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
