Commands Listed in Alphabetical Order
WFMOutpre:BY
T_Or
This command sets or queries which byte of binary waveform data is transmitted
first, during a waveform data transfer, when data points require more than one byte.
This specific
ation only has meaning when WFMOutpre:ENCdg is set to BIN.
Group
Waveform Transfer
Syntax
WFMOutpre:BYT_Or {LSB|MSB}
WFMOutpre:BYT_Or?
Related Commands
WFMOutpre:ENCdg
Arguments
LSB specifies that the least signific
ant byte will be transmitted first.
MSB specifies that the most signifi cant byte will be transmitted first.
Examples
WFMOUTPRE:BYT_OR MSB sets the most significant outgoing byte of waveform
data to be transmitted first.
WFMOUTPRE:BYT_OR? might return :WFMOUTPRE: BYT_OR LSB, indicating that
the least significant data byte will be transmitted first.
WFMOutpre:ENCdg
This command sets and queries the type of encoding for outgoing waveforms.
Group
Waveform Transfer
Synt
ax
WFMOutpre:ENCdg {ASCii|BINary}
WFMOutpre:ENCdg?
Related Commands
DATa:ENCdg, WFMOutpre:BYT_Nr, WFMOutpre:BYT_Or,
WFMOutpre:BIT_Nr, WFMOutpre:BN_Fmt
Arguments
ASCii specifies that the outgoing data is to be in ASCII format. Waveforms
internally stored as integers will be sent as <NR1> numbers, while those stored as
floating point will be sent as <NR3> numbers.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-641
To Next Page
Loading...
Need help?
General
