Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
SEARCH:SEARCH
1:TRIGGER:A:DDRMEMORY:MAXCAS 2.0000
sets M AXCas to
2.0 clock periods to the left of the start of the mark.
SEARCH:SEARC
H1:TRIGGER:A:DDRMEMORY:MAX CAS?
might return
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:MAXCAS 3.0000 indicating
MAXCas is set to 3.0 clock periods to the left of the mark.
SEARCH:SEA
RCH<x>:TRIGger:A:DDRMemory:MINCas
This command sets or queries the minimum distance, in clock periods, to the left
of the s tart of the mark where the instrument looks for the chip-select pulse.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:MINCas
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:MINCas?
Arguments
<NR3> is the minimum distance, in clock periods, to the left of the start of the
mark where the instrument looks for the chip-select pulse.
Examples
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:MINCAS 2.0000 sets MINCas to
2.0 clock periods to the left of the start of the mark.
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:MINCAS? might return
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:MINCAS 2.0000 indicating
MINCas is set to 2.0 clock periods to the left of the mark.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATA:HIGH
This command sets or queries the value of the data HIGH reference level for a
DDR Memory analysis search to determine where to place a mark. You can set
the value only when AUTOREFLEVEL is Custom. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:REFLevel:DATA:HIGH
<NRF>
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:REFLevel:DATA:HIGH?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:AUTOReflevel
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-437

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English