Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
TEST "1 13" exec
utes a specific Acquisition Memory test
(Subsystem:Acquisition, Area:Memory, Test:Address Lines).
TEST:RESults? (Query Only)
This query-only command returns an abbreviated status about the results of
the last TEST execution. This command is equivalent to selecting Instrument
Diagnostics from the Utilities menu and then reviewing the Diagnostic Status.
Group
Diagnostics
Syntax
TEST:RESults?
Related Commands
TEST, TEST:RESults:VERBose?
Examples
TEST:RESULTS? might return :TEST:RESULTS "135", indicating the specific
failure code of the first test failure.
TEST:RESULTS? might return :TEST:RESULTS "PASS", indicating that the
previously executed test passed.
TEST:RESULTS? might return :TEST:RESULTS "*****", indicating that the
test was not run.
TEST:RESu
lts:VERBose? (Query Only)
This query-only command returns a more explanatory message about the results
of the last TEST execution than the TEST:RESults? query. This command is
equivale
nt to selecting Instrument Diagnostics from the Utilities menu and then
clicking the Error Log button.
Group
Diagnostics
Syntax
TEST:RESults:VERBose?
Related Commands
TEST, TEST:RESults?
Examples
TEST:RESULTS:VERBOSE? might return :TEST:RESULTS:VERBOSE DIAG
ABORTED, ERROR 15 in A2D-Dmux 1 interconnects"
.
2-494 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English