Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
GRId specifies a
frame and grid only.
IRE specifies an IRE video graticule, and sets the vertical scale to 143 mV per
division.
NTSC specifies an NTSC video graticule (same a s the IRE graticule), and sets the
vertical sc
ale to 133 mV per division.
MV specifies an mV video graticule and sets the vertical scale to 133 mV per
division. T
his graticule is used to measure PAL standard video signals.
PAL specifies a PAL video graticule (same as the mV graticule) and sets the
vertical s
cale to 133 mV per division. This graticule is used to measure PAL
standard video signals.
Examples
DISPLAY:GRATICULE FRAME sets the graticule type to d isplay the frame only.
DISPLAY:GRATICULE? might return :DISPLAY:G RATICULE FULL, indicating
that all graticule elements are selected.
DISplay:INTENSITy? (Query Only)
This query-only command returns the waveform saturation level and screen saver
settings. This command is equivalent to selecting Display Setup from the Display
menu and c hoosing the Appearance tab.
Group
Display Control
Syntax
DISplay:INTENSITy?
Related Commands
DISplay:INTENSITy:WAVEform:IMAGEView, DISplay:INTENSITy:
WAVE f
orm:RECORDView
Arguments
None
Examp
les
DISPLAY:INTENSITY? might return
:DISPLAY:INTENSITY:WAVEFOR M:IMAGEVIEW 75.0000;RECORDVIEW
10.0000;:DISPLAY:INTENSITY :AUTOBRIGHT 1
.
DISplay:INTENSITy:WAVEform:IMAGEView
This command sets or queries the saturation level for image view waveforms.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-189

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English