Commands Listed in Alphabetical Order
Trigger Setup f
rom the Trig menu, selecting Pattern or State for the Trigger Type,
and setting or viewing the Pattern Type.
Group
Trigger
Syntax
TRIGger:{A|B}:LOGIc:FUNCt ion {AND|NANd|NOR|OR}
TRIGger:{A|B}:LOGIc:FUNCt ion?
Related Commands
TRIGger:{A|B}:LOGIc:PATtern:WHEn, TRIGger:{A|B}:LOGIc:INPut:CH<x>,
TRIGger:{A|B}:LOGIc:THReshold:CH<x>
Arguments
AND specifies to trigger if a ll conditions are true.
NANd specifies to trigger if any of the c onditions are false.
NOR specifies to trigger if all conditions are false.
OR specifies to trigger if any of the conditions are true.
Examples
TRIGGER:A:LOGIC:FUNCTION AND sets the logical combination of channels to
be true when all conditions are true.
TRIGGER:A:LOGIC:FUNCTION? might return :TRIGGER:A:LOGIC:FUNCTION
NAND
, indicating that the instrument will trigger if the AND logic conditions
are false.
TRIGger:{A|B}:LOGIc:INPut? (Query Only)
This query-only command returns the logic trigger input expected for
Channel 1, 2, and 3. Channel 4 is set or queried with the command
TRIGger:{A|B}:LOGIc:PATtern:INPut:CH<x>.
This command is equivalent to selecting Event Trigger Setup and viewing or
setting the Input Threshold for the channels.
Group
Trigger
Syntax
TRIGger:{A|B}:LOGIc:INPut ?
Related Commands
TRIGger:{A|B}:LOGIc:PATtern:INPut:CH<x>
2-504 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
