Tektronix DPO70000 Series Programmer's Manual

Command Groups
Vertical Comm
and Group
Use the commands in the Vertical Command Group to control the vertical setup of
all live (channel) waveforms for acquisition and to control the display of channel,
reference, a
nd math waveforms.
You may replace VOLts with SCAle in the vertical commands. This provides
program com
patibility with earlier models of Tektronix instruments.
Command
Description
AUXIn:BANdwidth
Sets or returns the selectable low-pass
bandwidt
hlimitfilter of the AUX In input
AUXIn:CO
UPling
Sets or re
turns the input attenuator coupling
setting for the AUX In input
AUXIn:OFFSet Sets or returns the vertical offset for the AUX
In input
AUXIn:PRObe:AUTOZero Sets the probe attached to the AUX In input
to auto
zero
AUXIn
:PRObe:DEGAUSS
Start
s a degauss cycle of the probe attached
to the AUX In input
AUXIn:PRObe:DEGAUSS:STATE?
Retur
ns whether the probe attached to the
AUX In input has been degaussed
AUXIn:PRObe:FORCEDRange Sets the probe attached to the AUX In input
to the default range of the probe, or the
comm
and returns the default r ange of the
probe
AUXIn:PRObe:GAIN? Returns the gain factor of the probe that is
attached to the AUX In input
AUXIn:PRObe:ID:SERnumber?
Returns the probe serial number
AUXIn:PRObe:ID:TYPe?
Returns the probe type
AUXIn:PRObe:INPUTMode Sets or returns one of the probe’s four input
m
odes
A
UXIn:PRObe:INPUTMode:AOFFSet
S
ets or returns the requested A mode offset
control of the probe that is attached to the
AUX In input
AUXIn:PRObe:INPUTMode:BOFFSet Sets or returns the requested B mode offset
control of the probe that is attached to the
AUX In input
AUXIn:PRObe:INPUTMode:CMOFFSet Sets or returns the requested common mode
offset control of the probe that is attached to
the AUX In input
AUXIn:PRObe:INPUTMode:DMOFFSet Sets or returns the requested differential
mode offset control of the probe that is
attached to the AUX In input
AUXIn:PRObe:RANge Sets or queries the set attenuation range of
the probe on the AUX In input
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-63

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English