Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
TRIGger:A:RS
232:DATa:VALue
DPO7000 Series only: This command sets or queries the binary data string used
for RS232 triggering.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:RS232:DATa:VALu e <String>
TRIGger:A:RS232:DATa:VALu e?
Arguments
<NR3> specifies the RS232 data value. The value can be up to 8 bits.
Examples
TRIGGER:A:RS232:DATA:VALU E “1011 ” sets the RS232 triggering data value
to 1011.
TRIGGER:A:RS232:DATA:VALU E? might return
:TRIGGER:A:RS232:DATA:VAL UE 10111, indicating that the RS232 data
value is set to 10111.
TRIGger:A:RS232:FORMat
DPO7000 Series only: This command sets or queries the display format for the
RS232 data value.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:RS232:FORMat {BINary|HEX}
TRIGger:A:RS232:FORMat?
Arguments
BINary specifi es binary for the display format.
HEX specifies hexadecimal for the display format.
Examples
TRIG
GER:A:RS232:FORMAT HEX
sets the display format for the RS232 data to
hexadecimal.
TRI
GGER:A:RS232:FORMAT?
might return
:TRIGGER:A:RS232:DATA:FOR MAT BINARY, indicating that the display format
for the RS232 data is set to binary.
2-578 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English