Commands Listed in Alphabetical Order
MARK:SELecte
d:ZOOm:POSition? (Query Only)
This query-only command returns the position of the selected mark, of the zoom
overview w indow. If the return value is less than zero then the zoom scale will not
be changed w h
en Next or Prev makes this the selected mark.
Group
Search and Mark
Syntax
MARK:SELected:ZOOm:POSitio n?
Examples
MARK:SELECTED:ZOOM:POSITIO N? might return
:MARK:SELECTED:ZOOM:POSITI ON 27.7000, indicating that the position
is 27.7%.
MARK:SELected:ZOOm:SCAle? (Query Only)
This query-only command returns the scale of the selected mark of the zoom
overview window. The returned value might be < 0 (for example from Search),
which means that the zoom scale will not be changed when Next or Prev makes
this the selected mark.
Group
Search and Mark
Syntax
MARK:SELected:ZOOm:SCAle?
Examples
MARK:SELECTED:ZOOM:SCALE? might return :MARK: SELECTED:ZOOM:SCAlE
5.0
, indicating that the zoom scale value 5.0 will be used when a mark is the
selected mark.
MARK:TOTal? (Query Only)
This query-only command returns how many marks are currently in use.
Group
Search and Mark
Syntax
MARK:TOTal?
Examples
MARK:TOTAL? might return :MARK:TOTAL 210, indicating that 210 marks are in
use.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-285
To Next Page
Loading...
Need help?
General
