Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
NEGative speci
fies that the instrument will only trigger when the polarity of
the glitch is n egative.
EITher specifies that the instrument will trigger when the polarity of the glitch
is either positive or negative.
Examples
TRIGGER:A:PULSE:GLITCH:POL ARITY EITHER specifies that the polarity of
the glitch can be either positive or negative for the A trigger to occur.
TRIGGER:A:PULSE:GLITCH:POL ARITY? might return
:TRIGGER:A:PULSE:GLITCH:PO LARITY POSITIVE, indicating that
the polarity of the glitch must b e positive for the trigger to occur.
TRIGger:{A|B}:PULse:GLItch:POLarity:CH<x>
This command sets or queries the polarity for A or B pulse glitch trigger for
the channel.
This command is equivalent to selecting Glitch Setup from the Trig menu and
then choosing the desired Polarity.
Group
Trigger
Syntax
TRIGger:{A|B}:PULse:GLItch :POLarity:CH<x>
{EITher|NEGAtive|POSITIVe}
TRIGger:{A|B}:PULse:GLItch :POLarity:CH<x>?
Related Commands
TRIGger:{A|B}:LEVel, TRIGger:{A|B}:PULse:GLItch:WIDth
Arguments
POSITIVe specifies that the instrument will only trigger when the polarity of the
glitch is positive.
NEGATIVe specifies that the instrument will only trigger when the polarity of
the glitch is n egative.
EITHer specifies that the instrument will trigger when the polarity of the glitch
is either positive or negative.
Examples
TRIGGER:A:PULSE:GLITCH:POL ARITY:CH2 EITHER spe cifies that the
polarity of the glitch can be either positive or negative for the Channel 2 trigger
to occur.
TRIGGER:A:PULSE:GLITCH:POL ARITY:CH2? might return
:TRIGGER:A:PULSE:GLITCH:PO LARITY:CH2 POSITIVE, indicating that the
polarity of the glitch must be positive for the Channel 2 trigger to occur.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-523

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English