Commands Listed in Alphabetical Order
TRIGger:A:SE
RIAL:STANdard
This command sets or queries the standard that identifies the code and bit rate.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:SERIAL:STANdard
{FC133|FC266|FC531|FC1063 |D1|D2|VIDEO270|VIDEO360|OC1|OC3|
OC12|ENET1250|FW1394BS400 B|FW1394BS800B|CUSTom|ENET100FX|
RIO_500M|RIO_750M|RIO_1G| RIO_SERIAL_1G|VSROC192|ENETXAUI|
SAS3_?|PCIExpress|INFINIB AND|RIO_SERIAL_2G|RIO_SERIAL_3G|
FC2125|RIO_2G|FW1394BS160 0B|SAS1_5|ENETXAUI|ENETXAUI2|
FC2125|FC4250|FW1394BS160 0B|INFINIBAND|PCIExpress|PCIExpress2|
RIO_2G|RIO_500M|RIO_750M| RIO_SERIAL_1G|RIO_SERIAL_2_5G|
RIO_SERIAL_3G|SAS6_0|SATA 1_5|SATA3_0|SATA6_0}
TRIGger:A:SERIAL:STANdard ?
Related Commands
Arguments
All of the standards may not be available on every instrument.
CUSTom:NRZ,155.5Mb/s
ENET100FX: MLT3, 100 Mb/s
ENET1250: NRZ, 3.125 Gb/s
ENETXAUI:NRZ,1.25Gb/s
ENETXAUI2:NRZ,6.25Gb/s
FC133: NRZ, 132.8 Mb/s
FC266: NRZ, 265.6 Mb/s
FC2125:NRZ,2.125Gb/s
FC4250:NRZ,4.25Gb/s
FC531: NRZ, 531.2 Mb/s
FC1063:NRZ,1.063Gb/s
FW1394BS400B:NRZ,491.5Mb/s
FW1394BS1600B:NRZ,1.966Gb/s
FW1394BS800B:NRZ,983.0Mb/s
INFINIBAND:NRZ,2.5Gb/s
OC1:NRZ,51.84Mb/s
OC3: NRZ, 155.5 Mb/s
2-588 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
