Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:COPy (No Query Form)
This command (no query form) copies the search criteria to the trigger, the trigger
criteria to a search, or copy search to search. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:COPy
{SEARCHtotrigger
|TRIGgertosearch|FROMSearch< x>}
Arguments
SEARCHtotrigger copies the search criteria to the trigger.
TRIGgertosearch copies the trigger criteria to the search.
FROMSearch<x> copies the search criteria to the search, where <x> is 1 to 8.
Examples
SEARCH:SEARCH1:COPY TRIGGERTOSEARCH copies the trigger criteria to the
search 1 criteria.
SEARCH:SEARCH<x>:STATE
This command sets the search state to on or off. <x> is the search number, which
can be 1 to 8. The query form returns the search state.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:STATE {<NR1>|OFF|ON}
SEARCH:SEARCH<x>:STATE?
Arguments
OFF or <NR1> = 0 sets the search state to off.
ON or <NR1> ≠0 sets the search state to on.
Examples
SEARCH:SEARCH2:STATE ON sets the search state for search 2 on.
SEARCH:SEARCH1:STATE? might return :SEARCH:SEARCH1:STATE 0,
indicating that the search 1 is off.
2-430 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
