Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
HORizontal:FA
STframe:MULtipleframes:FRAME STart:<wfm> <NR1>
HORizontal:FASTframe:MULt ipleframes:FRAMESTart:<wfm>?
Related Commands
HORizontal:FASTframe:MULtipleframes:NUMFRames:<wfm>, HORizontal:
FASTframe:MULtipleframes:MODe, HORizontal:FASTframe:COUNt
Arguments
<NR1> specifies the start frame number on the specified waveform.
Examples
HORIZONTAL:FASTFRAME:MULT IPLEFRAMES:FRAMESTART:CH1 3 sets the
start frame number to frame 3 on Channel 1.
HORIZONTAL:FASTFRAME:MULT IPLEFRAMES:FRAMESTART:CH1? might
return
:HORIZONTAL:FASTFRAME:MULTI FRAMES:FRAMESTART:CH1 3,
indicating that the start frame number is frame 3 for Channel 1.
HORizontal:FASTframe:MULtipleframes:MODe
This command sets or queries the mode for the FastFrame multiple frames feature.
This feature displays multiple frames in an overlaid manner.
Group
Horizontal
Syntax
HORizontal:FASTframe:MULt ipleframes:MODe
{OFF|OVERlay|ONLYOVERlay}
HORizontal:FASTframe:MULt ipleframes:MODe?
Related Commands
HORizontal:FASTframe:MULtipleframes:FRAMESTart:<wfm>,
HORizontal:FASTframe:MULtipleframes:NUMFRames:<wfm>,
HORizontal:FASTframe:COUNt
Arguments
OFF turns off the multiple frames mode.
OVERlay sets the multiple frames mode to overlay.
Examples
HORIZONTAL:FASTFRAME:MULT IPLEFRAMES:MODE OFF turns off the multiple
frames mode.
HORIZONTAL:FASTFRAME:MULT IPLEFRAMES:MODE? might return
:HORIZONTAL:FASTFRAME:MUL TIPLEFRAMES:MODE OFF, indicating that the
multiple frames mode is off.
2-242 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English