To Next Page

To Previous Page

Commands Listed in Alphabetical Order

Syntax

CURSor:SCREEN

:XPOSITION<x>

CURSor:SCREEN:XPOSITION<x >?

CURSor:SCREE

N:YPOSITION<x>

This command sets or queries the y position of the speciﬁed screen cursor. The

cursor is speciﬁed by x, which can be 1 or 2. If the cursor is not speciﬁed, it

defaults to

cursor 1.

Group

Cursor

Syntax

CURSor:SCREEN:YPOSITION<x >

CURSor:SCREEN:YPOSITION<x >?

CURSor:SOUrce<x>

This command sets o r queries the source(s) for the currently selected cursor type.

The cursor is speciﬁed by x, which can be 1 or 2. If the cursor is not speciﬁed,

it defaults to cursor 1.

This command is equivalent to selecting Cursor Setup from the Cursors menu,

andthenchoosingthedesiredcursorsource.

Group

Cursor

Syntax

CURSor:SOUrce<x> {CH<x>|MATH<x>|REF <x>}

CURSor:SOUrce<x>?

Arguments

CH<x> sets an input channel waveform as the cursor source. The valid channel

waveform range is from 1 through 4.

MATH<x> sets a math waveform as the cursor source. The valid math waveform

range is from 1 through 4.

REF<x> sets a reference waveform as the cursor source. The valid reference

waveform range is from 1 through 4.

Returns

Any valid waveform.

2-136 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Programmer's Manual

Other manuals for Tektronix DPO70000 Series