Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
ZOOm:MODe
This command turns Zoom mode on or off. The Zoom query returns the current
state of Zoom mode. This command is equivalent to pressing the ZOOM button
located on th
e front panel.
Group
Zoom
Syntax
ZOOm:MODe {ON|OFF|<NR1>}
ZOOm:MODe
Arguments
ON turns on Zoom mode.
OFF turns off Zoom mode.
<NR1> = 0 turns off Zoom mode; any other value turns on Zoom mode.
Examples
ZOOM:MODE OFF turns off Zoom mode.
ZOOM:MODE? might return :ZOOM:MODE 1, indicating that Zoom mode is
currently turned on.
ZOOm:REF<x>:HORizontal:POSition
This command sets or queries the horizontal position of the specified reference
waveform.
Group
Zoom
Syntax
ZOOm:REF<x>:HORizontal:POS ition <NR3>
ZOOm:REF<x>:HORizontal:POS ition?
Arguments
<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the
left of screen center, when the zoom factor is 1× or greater.
Examples
ZOOM:REF1:HORIZON
TAL:POSITION 50
sets the horizontal position of the
specified Reference 1 waveform to 50.
ZOOM:REF1:HORIZO
NTAL:POSITION?
might return
:ZOOM:REF1:HORIZONTAL:POSI TION 23.9000, indicating that the horizontal
position of the specified Reference 1 waveform is set to 23.9.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-653

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English