Commands Listed in Alphabetical Order
Syntax
DISplay:COLOr
:PALEtte:USEr RESET
DISplay:COLOr:PALEtte:USEr ?
Arguments
RESET sets a ll user palettes to their default values.
Examples
DISPLAY:COLOR:PALETTE:USER? might return
:DISPLAY:COLOR:PALETTE:USE R:GRATICULE 165,50,15;CH1
180,50,100;CH2 300 50,100;CH3 60,50,100;CH4 240,50,100;REF1
0,90,0;RE
F2 0,90 ,100;REF3 60,90,100;REF4 240,90,100;MATH1
160,50,100;MATH2 40,60,100;MATH3 120,60,100;MATH4
195,50,100;HISTOGRAM 320,50,100;CAR ET 150,50,100;MASK
0,25,75;MASKHIGHLIGHT 140,50,100
.
DISplay:COLOr:PALEtte:USEr:CARet
This command sets or queries the caret color for the user palette. It assigns the
HUE, li
ght, Saturation (HLS) triplet used for the caret color. The caret is the solid,
inverted delta positioned on the top graticule line, which indicates the trigger
position within the waveform record.
Group
Display Control
Synt
ax
DISplay:COLOr:PALEtte:USEr :CARet <NR1>,<NR1>,<NR1>
DISplay:COLOr:PALEtte:USEr :CARet?
Arguments
<NR1> Hue. Range of 0 to 360.
<NR1> Lightness. Range of 0 to 100.
<NR1> Saturation. Range of 0 to 100.
Examples
DISPLAY:COLOR:PALETTE:USER :CARET 330,75,100 sets the caret color hue
to 330, the lightness to 75, and the saturation to 100.
DISPLAY:COLOR:PALETTE:USER :CARET? might return
:DISPLAY:COLOR:PALETTE:USE R:CARET 250, 85, 90, indicating that the
color hue is set at 250, the lightness is set to 85, and the saturation is set to 90.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-181
To Next Page
Loading...
Need help?
General
