Commands Listed in Alphabetical Order
Related Commands
PASSWord
Arguments
<Block> is a b lock containing up to 100 characters.
<QString> is a string containing up to 100 characters.
Examples
*PUD #2 29This instrument belongs to me stores the string “This
instrument belongs to me” in the user protected data area.
*PUD? might return # 221PROPERTY OF COMPANY X.
*RCL (No Query Form)
This command (no query form) restores the state of the instrument from a copy of
the settings stored in memory (The settings are stored using the *SAV command).
If ‘factory’ is referenced (by specifying ‘0’), the factory default values will be
restored.
This command is equivalent to RECAll:SETup and performs the same function a s
selecting Recall from the File menu, and then pressing the Setup button.
Group
Save and Recall
Syntax
*RCL <N R1>
Related Commands
DELEte:SETUp, FACtory, *LRN?, RECAll:SETUp, *RST, *SAV, SAVe:SETUp
Arguments
<NR1> specifies a setup storage location value ranging from 0 through 10. Using
an out-of-range value causes an execution error.
Examples
*RCL 3 restores the instrument from a copy of the settings stored in memory
location 3.
RECAll:MASK (No Query Form)
This comman
d (no query form) recalls a stored mask as the User mask.
Group
Mask
Syntax
RECAll:MASK <QString>
2-414 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
