Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
EMAIL:ATTEMPT
S15
specifies that 15 attempts will be made to send the e-mail
to the SMTP e-mail server.
EMAIL:ATTEMP
TS?
might return :EMAIL:ATTEMPTS 10, indicating that 10
attempts will be made to send the e-mail to the SMTP e-mail server.
EMail:AUTHLogin
This command sets or queries the login name that will be used if the SMTP e-mail
server requires one for authentication.
Group
E-mail
Syntax
EMail:AUTHLogin {<QString>}
EMail:AUTHLogin?
Arguments
<QString> argument is a string that specifies the login name to be used with
the SMTP e-mail server.
Examples
EMAIL:AUTHLOGIN kentb specifies that kentb will be used as the login name
with the SMTP e-mail server.
EMAIL:AUTHLOGIN? might return :EMAI L:AUTHLOGIN "bobk", indicating that
bobk will be used as the login name used with the SMTP e-mail server.
EMail:AUTHPassword (No Query Form)
This command (no query form) sets the password that will be used if the SMTP
e-mail server requires one for authentication.
Group
E-mail
Syntax
EMail:AUTHPassword {<QString>}
Arguments
<QString> argument is a string that specifies the password to be used with the
SMTP e-mail server.
Examples
EMAIL:AUTHPASSWORD "123xyz" specifies that 123xyz will be used as the
password with the S MTP e-mail server.
2-202 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English