Commands Listed in Alphabetical Order
Group
Diagnostics
Syntax
DIAg:ITEM:SUBITEMS? <NR1>
Related Commands
DIAg:ITEM?, DIAg:ITEM:NAMe?, DIAg:ITEM:FAILURES?,
DIAg:ITEM:RESULT?
Arguments
<NR1> sets the index item about which data will be returned, which ranges from
0 through 15.
Examples
DIAG:ITEM:SUBITEMS? 2 might return : DIAG:ITEM:SUBIT EMS 2,8,
indicating that there are 8 subitems associated with the selected item.
DIAg:LEVEL
This command sets or returns the selected level of diagnostic test hierarchy. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu and then revi
ewing the Diagnostic Status.
Group
Diagnostics
Syntax
DIAg:LEVEL {SUBSYS|AREA|TEST}
DIAg:LEVEL?
Arguments
SUBSYS sets diagnostic testing to the subsystem level.
AREA sets diagnostic testing to the area level.
TEST sets diagnostic testing to the test level.
Examples
DIAG:LEVEL AREA sets the level of diagnostic test hierarchy to Area.
DIAG:LEVEL? might return :DIAG:LEVE L SUBSYSI, indicating that the current
level of diagnostic test hierarchy is Subsys.
DIAg:LOOPS? (Query Only)
This query-only command returns the number of times that the selected
diagnostics set was completed during the last diagnostic execution. This command
is equivalent to selecting Instrument Diagnostics from the Utilities menu and then
reviewing the Elapsed Loops.
2-168 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
