Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Related Commands
TRIGger:{A|B}
:LOGIc:SETHold:DATa?, TRIGger:{A|B}:LOGIc:SETHold:
CLOCk:EDGE, TRIGger:{A|B}:LOGIc:SETHold:CLOCk:THReshold,
TRIGger:{A|B}:LOGIc:SETHold:CLOCk:SOUrce
Examples
TRIGGER:A:LOGIC:SETHOLD:C LOCK? might return
:TRIGGER:A:LOGIc:SETHold: CLOCk:EDGE RISE; THRESHOLD
1.4000;SOURCE CH2
indicating the current clock settings for setup and hold
triggering.
TRIGger:{A|B}:LOGIc:SETHold:CLOCk:EDGE
This command sets or queries the clock edge polarity for setup and hold
triggering. This is equivalent to selecting Setup/Hold Setup from the Trig menu
and then choosing the desired Clock Edge.
Group
Trigger
Syntax
TRIGger:{A|B}:LOGIc:SETHo ld:CLOCk:EDGE {FALL|RISe}
TRIGger:{A|B}:LOGIc:SETHo ld:CLOCk:EDGE?
Related Commands
TRIGger:{A|B}:LOGIc:SETHold:CLOCk:SOUrce, TRIGger:{A|B}:LOGIc:
SETHold:CLOCk:THReshold
Arguments
FALL specifies polarity as the clock falling edge.
RISe specifi es polarity as the clock rising edge.
Examples
TRIGGER:A:LOGIC:SETHOLD:C LOCK:EDGE RISE specifies the polarity as
the clock rising edge.
TRIGGER:A:LOGIC:SETHOLD:C LOCK:EDGE? might return
:TRIGGER:A:LOGIC:SETHOLD: CLOCK:EDGE RISE, indicating that
polarity is speci fi ed as the clock rising edge.
TRIGger:{A|B}:LOGIc:SETHold:CLOCk:SOUrce
This command sets
or queries the clock source for the A or B logic trigger setup
and hold input. This is equivalent to selecting Setup/Hold Setup from the Trig
menu and choosing the desired channel from the Clock Source drop-down list.
Group
Trigger
2-510 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English