Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
TRIGger:A:I2C
:CLOCk:LEVel <NR3>
TRIGger:A:I2C:CLOCk:LEVel ?
Arguments
NR3 specifies the I2C clock level. The clock level range is ±5.
Examples
TRIGGER:A:I2C:CLOCK:LEVEL 0.0 sets the I2C clock level to 0.0.
TRIGGER:A:I2C:CLOCK:LEVEL ? might return
:TRIGGER:A:I2C:CLOCK:LEVE L 5.0000, indicating that the I2C c lock level
is set to 5.
TRIGger:A:I2C:CLOCk:SOUrce
DPO7000 Series only: This command sets or queries the clock source for the
I2C Serial Trigger.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:I2C:CLOCk:SOUrc e CH<x>
TRIGger:A:I2C:CLOCk:SOUrc e?
Arguments
CH<x> specifies the clock source. X can be 1 through 4.
Examples
TRIGGER:A:I2C:CLOCK:SOURC E CH1 sets the I2C clock source to channel CH1.
TRIGGER:A:I2C:CLOCK:SOURC E? might return
:TRIGGER:A:I2C:CLOCK:SOUR CE CH3, indicating that the I2C clock source
is set to CH3.
TRIGger:A:I2C:CONDition
DPO7000 Series only: This command sets or queries the trigger condition for
the I2C trigger.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:I2C:CONDition
{STARt|STOP|REPEATstart|A CKMISS|ADDRess|DATA|ADDRANDDATA}
TRIGger:A:I2C:CONDition?
2-570 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English