Command Groups
Command
Description
TRIGger:A:VIDeo:SCAN Sets or returns the video scan rate
TRIGger:A:VIDeo:S OU rce Sets or returns the video trigger source
TRIGger:A:VIDeo:STANdard Sets or returns the video standard
TRIGger:A:VIDeo? Returns the video parameters for the A trigger
TRIGger:AUXLevel Sets or returns the level for the auxiliary
trigger
TRIGger:B Sets the B trigger level to 50% or returns the
B trigger
parameters
TRIGger:
B:BY
Sets or re
turns B trigger time or event
qualifiers
TRIGger:B:EVENTS:COUNt Sets or returns the number of events that
must occur before the B trigger occurs
TRIGger:B:EVENTS?
Returns the current B trigger events
parameter
TRIGger:B:PULse:WINdow:POLarity Sets or queries the pulse trigger window
polar
ity of the selected trigger Source
TRIGg
er:B:PULse:WINdow:POLarity:
CH<x>
Sets o
r queries the pulse trigger window
polarity of the specified channel
TRIGger:B:RESET:SOUrce S ets or returns the source for the trigger reset
TRIGger:B:RESET:STATE Sets or returns the state of the B trigger
TRIGger:B:RESET:THReshold Sets or returns the threshold for the trigger
reset
TRIGger:B:RESET:TIMEOut Sets or returns the reset time for the timeout
tr
igger reset
T
RIGger:B:RESET:TRANsition
S
ets or r eturns the type of transition required
for a transition trigger reset
TRIGger:B:RESET:TYPe Sets or returns the type of A→B sequential
trigger reset
TRIGger:B:TIMe Sets or returns the B trigger delay time
TRIGger:B:STATE Returns the current state of the triggering
system
TRIGger:B:TYPe Sets or returns the type of B trigger
TRIGger:ENHanced Sets or returns the state of trigger position
enhancement.
TRIGger:LVLSrcpreference Sets or returns how the trigger source and
levels interact
TRIGger:STATE? Returns the current state of the triggering
system
TRIGger:SENS ITivity Set or returns the state of trigger sensitivity.
When on, the instrument calculates a rolling
average for trigger position enhancement
2-62 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual