Tektronix DPO70000 Series Programmer's Manual

Command Groups
Command
Description
MEASUrement:ANNOTation:NUMY? Returns the number of vertical measurement
annotations being displayed
MEASUrement:ANNOTation:STATE Sets or returns the state of visible
measurement
annotations
MEASUremen
t:ANNOTation:TYPe
Sets or retu
rns the type of annotations being
used
MEASUrement:ANNOTation:X<x>? Returns the value of the specified annotation
MEASUrement:ANNOTation:Y<x>? Returns the value of the specified annotation
MEASUrement:GATing Sets or returns the measurement gating
MEASUrement:IMMed?
Returns a
ll immediate m easurement setup
parameters
MEASUrement:IMMed:DELay? Returns information about the immediate
delay measurement
MEASUrement:IMMed:DELay:DIREction Sets or returns the search direction to use
for imm
ediate delay measurements
MEASU
rement:IMMed:DELay:EDGE[1]
Sets o
r returns the slope of the edge
used for immediate delay “from” waveform
measurements
MEASUrement:IMMed:DELay:EDGE2 Sets or returns the slope of the edge
used
for immediate delay “to” waveform
measurements
MEASUrement:IMMed:M ET H od Specifies or queries the method used to
calculate the 0% and 100% reference level
for
immediate measurements
ME
ASUrement:IMMed:NOISe
Se
ts or returns the location of the noise
measurement on the eye waveform
MEASUrement:IMMed:R EF Level? Returns the reference levels
MEASUrement:IMMed:REFLevel:ABSolute:
HIGH
Sets or returns the high reference level
MEASUrement:IMMed:REFLevel:ABSolute:
LOW
Sets or returns the low reference level
MEASUrement:IMMed:REFLevel:ABSolute:
MID<x>
Sets or returns the middle reference levels
MEASUrement:IMMed:R EF Level:M ET Hod Sets or returns the method used to calculate
measurements
MEASUrement:IMMed:R E F Level:P ERCent:
HIGH
Sets or returns the top level for rise time
(90% level)
MEASUrement:IMMed:R E F Level:P ERCent:
LOW
Sets or r eturns the low level for rise time
(10% level)
MEASUrement:IMMed:R E F Level:P ERCent:
MID<x>
Sets or returns the m id levels for
measurements
2-40 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English