Hydro:Evolved User Manual
Page 100 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
11 Speeds
Individual speed profiles can be set to operate the car.
11.1 Contract Speed
Contract speed should be set as the maximum speed the car is running at with an empty load.
This helps to determine the factor which calculates the slowdown distance for different speed
threshold.
The adjustment range is from 10-200 fpm.
• Default = Job Specific
• Units of Measure = fpm
The following procedure describes how to set the maximum speed.
Navigate to MAIN MENU | SETUP | SPEEDS. See Figure 55.
From the SPEEDS menu, scroll and select Contract Speed.
Figure 116: SPEEDS Menu – Contract Speed
From the CONTRACT SPEED menu, set the contract speed.
Figure 117: CONTRACT SPEED Menu
Scroll right and press Save.
11.2 Leveling Speed
Leveling speed is the steady state of the car when it moves at low speed with only the leveling
valve active. The speed will be determined by how the leveling valves are adjusted. As the
weights in the car increases, the leveling speed might decrease and the steady state of the car
during leveling would be longer if the valves are unregulated.
To Next Page
Loading...
Need help?
General
