Hydro:Evolved User Manual
Page 202 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
Triggers a reset of an active regen fault.
Triggers manual rescue in event of power loss.
Cycle power to a faulted soft starter.
Signal to start pump motor.
Start pump motor (secondary soft starter).
Triggers the high speed valve in the down direction.
Triggers the high speed valve in the up direction.
Signal to blaine valve controller that the car is attempting an
inspection run.
Triggers the leveling speed valve in the down direction.
Triggers the leveling speed valve in the up direction.
Triggers the low speed valve in the down direction.
Triggers the low speed valve in the up direction.
Triggers the medium speed valve in the down direction.
Triggers the medium speed valve in the up direction.
Table 43: Description of Emergency Power Outputs
Car is on emergency power operation.
Car is on emergency power operation and is recalling or has been
released back into automatic operation.
Car is on emergency power operation and is recalling or has been
released back into automatic operation.
Car is on emergency power operation and is recalling or has been
released back into automatic operation.
Car is on emergency power operation and is recalling or has been
released back into automatic operation.
Car is on emergency power operation and is recalling or has been
released back into automatic operation.
Car is on emergency power operation and is recalling or has been
released back into automatic operation.
Car is on emergency power operation and is recalling or has been
released back into automatic operation.
Car is on emergency power operation and is recalling or has been
released back into automatic operation.
Table 44: Description of Fire/Earthquake Outputs
Activates when the car is in EQ Hoistway Scan operation.
Used by Peelle door operator. Active if Fire Phase 1 is active and
recall has not completed.
To Next Page
Loading...
Need help?
General
