Smartrise HYDRO:EVOLVED User Manual

Hydro:Evolved User Manual
Page 196 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
Input
Description
UPH Valve Mon
Monitors safety relay for cutting the up high valve's neutral side.
If the input is high, the valve's neutral side is disconnected. Only
checked if programmed.
Valve FLT
Valve controller generic fault.
Table 34: Description of Emergency Power Inputs
Input
Description
Auto Select
After all cars have completed their recall, a preconfigured number
of cars are released to go back to automatic operation. These cars
are auto selected.
E-Power On
Car is on generator power. Puts car on emergency power
operation.
PreTransfer
Car is moving from generator Description back to main line
power. Cars should stop at their nearest reachable landings and
hold doors open.
Select 1
After all cars have completed their recall, a preconfigured number
of cars are released to go back in to automatic operation. These
cars are manually selected via the select inputs if Auto Select is
inactive.
Select 2
After all cars have completed their recall, a preconfigured number
of cars are released to go back in to automatic operation. These
cars are manually selected via the select inputs if Auto Select is
inactive.
Select 3
After all cars have completed their recall, a preconfigured number
of cars are released to go back in to automatic operation. These
cars are manually selected via the select inputs if Auto Select is
inactive.
Select 4
After all cars have completed their recall, a preconfigured number
of cars are released to go back in to automatic operation. These
cars are manually selected via the select inputs if Auto Select is
inactive.
Select 5
After all cars have completed their recall, a preconfigured number
of cars are released to go back in to automatic operation. These
cars are manually selected via the select inputs if Auto Select is
inactive.
Select 6
After all cars have completed their recall, a preconfigured number
of cars are released to go back in to automatic operation. These
cars are manually selected via the select inputs if Auto Select is
inactive.
Select 7
After all cars have completed their recall, a preconfigured number
of cars are released to go back in to automatic operation. These
cars are manually selected via the select inputs if Auto Select is
inactive.
Select 8
After all cars have completed their recall, a preconfigured number
of cars are released to go back in to automatic operation. These

Smartrise HYDRO:EVOLVED Specifications

General

Brand	Smartrise
Model	HYDRO:EVOLVED
Category	Controller
Language	English