Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 259
31.3.5.1 Main or Alternate
The car travels to the main landing when smoke has been detected. If configured and the
smoke is on that floor, the car travels to an alternated landing.
The following procedure describes if the car travels to the main or alternate designated landing
when smoke has been detected.
Navigate to MAIN MENU | SETUP | FIRE. See Figure 56.
From the FIRE SERVICE menu, scroll and select Hoistway Smoke.
Figure 484: FIRE SERVICE Menu – Hoistway Smoke
From the HOISTWAY SMOKE menu, scroll and select Main or Alt.
Figure 485: HOISTWAY SMOKE Menu – Main or Alt
From ALT FLOOR menu, scroll and select if the main or alternate floor is configured for
hoistway smoke. See Figure 474.
Scroll right and press Save.
31.3.5.2 Flash Fire Hat
If the fire flash hat been enabled during hoistway smoke, a fire hat symbol on the panel flashes
when smoke has been detected.
The following procedure describes how to enable the flash fire hat.
Navigate to MAIN MENU | SETUP | FIRE. See Figure 56.
From the FIRE SERVICE menu, scroll and select Hoistway Smoke. See Figure 484.
From the HOISTWAY SMOKE menu, scroll and select Flash Fire Hat.
Figure 486: HOISTWAY SMOKE Menu – Flash Fire Hat
To Next Page
Loading...
Need help?
General
