Hydro:Evolved User Manual
Page 230 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
From the MISCELLANEOUS menu, scroll and select Default. Figure 409.
From the DEFAULT menu, scroll and select Default Run Timers.
Figure 416: DEFAULT Menu – Default Run Timers
From the DEFAULT RUN TIMERS? menu, select if restoring original run timers.
Figure 417: DEFAULT RUN TIMERS? Menu
From the DEFAULT RUN TIMERS? menu, select Yes to default run timers.
NOTE: If not defaulting run timers, select NO to back out.
Only the Learned floor values are defaulted. See Figure 413.
When the system has completed defaulting all parameters, the DEFAULTING
PARAMETERS menu displays PARAMETERS DEFAULTED. See Figure 413.
27.13.4 Default I/O
The user has the option to restore original inputs and outputs.
The following procedure describes how to select default I/O.
Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 57.
From the MISCELLANEOUS menu, scroll and select Default. Figure 409.
From the DEFAULT menu, scroll and select Default I/O.
Figure 418: DEFAULT Menu – Default I/O
To Next Page
Loading...
Need help?
General
