Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 127
Scroll right and press Save.
14.12 DC On Close
The DC On Close activates a door close output while the doors are in a closed state. This can be
useful if doors require constant pressure to prevent relaxing.
The following procedure describes how to set the DC on Close.
Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
From the DOORS menu, scroll and select DC On Close.
Figure 202: DOORS Menu – DC On Close
From the DC ON DOOR CLOSE menu, scroll and select ON to enable the doors to close.
Figure 203: DC ON DOOR CLOSE Menu
Scroll right and press Save.
14.13 DO On Open
The DO On Open activates a door open output while the doors are in an open state. This can be
useful if doors require constant pressure to prevent relaxing.
The following procedure describes how to set the DO on Open.
Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
From the DOORS menu, scroll and select DO On Open.
Figure 204: DOORS Menu – DO On Open
To Next Page
Loading...
Need help?
General
