Hydro:Evolved User Manual
Page 262 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
From the MR SMOKE menu, scroll and select Shunt Trip.
Figure 491: MR SMOKE Menu – Shunt Trip
From the SHUNT ON RECALL menu, scroll and select ON. See Figure 478.
Scroll right and press Save.
31.3.7 Recall Key
The recall key is the key that is used on the panel inside the car and in the hall usually in the
main lobby that is used for fire service to control the emergency landing. If the fire flash hat
been enabled when using the recall key, a fire hat symbol on the panel flashes on panel.
The following procedure describes how to enable the flash fire hat.
Navigate to MAIN MENU | SETUP | FIRE. See Figure 56.
From the FIRE SERVICE menu, scroll and select Recall Key.
Figure 492: FIRE SERVICE Menu – Recall Key
From the RECALL KEY menu, scroll and select Flash Fire Hat.
Figure 493: RECALL KEY Menu – Flash Fire Hat
From the FLASH FIRE HAT menu, scroll and select ON. See Figure 476.
Scroll right and press Save.
31.3.8 PIT Smoke
The PIT smoke is where the car is recalled to a designated landing when smoke has been
detected in the pit.
To Next Page
Loading...
Need help?
General
