Hydro:Evolved User Manual
Page 316 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
38.12.2 Terminal to Terminal
The terminal to terminal allows for the car to run from the bottom to top terminal landing with
the doors that open from the front or doors that open from the rear.
The following procedure describes how to set the car to run terminal to terminal.
Navigate to MAIN MENU | DEBUG | DEBUGRUNS. See Figure 66.
From the DEBUGRUNS menu, scroll and select Terminal to Terminal.
Figure 627: DEBUGRUNS Menu – Terminal to Terminal
From the TERMINAL TO TERMINAL menu, scroll and select if the front or rear doors
open while running terminal to terminal.
Figure 628: TERMINAL TO TERMINAL Menu – Front or Rear
From the TERMINAL TO TERMINAL (FRONT or REAR) menu, scroll and select if enabling
the car to stop at the other terminal with the doors that only open from the front or
rear.
Figure 629: TERMINAL TO TERMINAL FRONT Menu
Figure 630: TERMINAL TO TERMINAL REAR Menu
Scroll right and press Save.
To Next Page
Loading...
Need help?
General
