Hydro:Evolved User Manual
Page 272 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
From the EMS menu, scroll and select AllowPh2WithoutPh1.
Figure 517: EMS Menu – AllowPh2WithoutPh1
From the ALLOWPH2WITHOUTPH1 menu, scroll and select if the car is set to run in a
medical emergency.
Figure 518: ALLOWPH2WITHOUTPH1 Menu
Scroll right and press Save.
31.5.2 Exit Ph2 Any Floor
When Exit Ph2 any floor is active, the controller can exit EMS phase 2 at any floor. If set to On,
the car can only exit EMS Phase 2 on the floor where it entered EMS Phase 2.
The following procedure describes how the settings to allow for exit phase 2 at any floor.
Navigate to MAIN MENU | SETUP | EMS. See Figure 59.
From the EMS menu, scroll and select Exit Ph2 Any Floor.
Figure 519: EMS Menu – Exit Ph2 Any Floor
From the EXIT PH2 ANY FLOOR menu, scroll and select if the controller can exit phase 2
on any floor.
Figure 520: EXIT PH2 ANY FLOOR Menu
Scroll right and press Save.
To Next Page
Loading...
Need help?
General
