Hydro:Evolved User Manual
Page 220 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
From the MISCELLANEOUS menu, scroll and select Car To Lobby Floor.
Figure 383: MISCELLANEOUS Menu – Car To Lobby Floor
From the CAR TO LOBBY FLOOR menu, scroll and select the lobby floor the car
automatically travels to.
Figure 384: CAR TO LOBBY FLOOR Menu
Scroll right and press Save.
27.8 Parking
Parking moves the car to a certain floor after an X amount of time where X is the parking timer
27.8.1 GUI Parking
When enabled, dynamic parking is set through the DAD unit using a GUI interface. After a car has been
idle for a set period of time, the car travels to a designated floor, according to the hall call history, and
parks. Even though the car is parked, the car immediately answers all hall and car calls.
Dynamic parking can be set for multiple cars within a group. If a rule is set for multiple cars, then there is
a primary and secondary designated floor for cars to park. If the car that is parked at a primary floor
answers a car or hall call, the car parked at the secondary floor moves to the primary designated floor. If
one of the cars within the group remain idle for a set period of time, that car travels to the secondary
designated floor.
For more information, see the Hydro:Evolved GUI Manual.
The following procedure describes how to enable dynamic parking using the DAD unit.
Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 57.
From the MISCELLANEOUS menu, scroll and select Parking.
Figure 385: MISCELLANEOUS Menu – Parking
To Next Page
Loading...
Need help?
General
