Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 241
From the GENERAL ODL menu, enter the general debounce limit.
Figure 445: GENERAL ODL Menu
Scroll right and press Save.
30.3 NTS. ODL
The NTS ODL is used to reduce the sensitivity of the NTS trip points. Increase this value by 3-5
points to reduce nuisance tripping if elevator tracking is off at the terminal floors.
The following procedure describes how to set the NTS ODL.
Navigate to MAIN MENU | SETUP | Safety. See Figure 33.
From the SAFETY menu, scroll and select NTS ODL.
Figure 446: SAFETY Menu – NTS ODL
From the NTS ODL menu, enter the NTS debounce limit.
Figure 447: NTS ODL Menu
Scroll right and press Save.
30.4 TSRD ODL
The TSRD ODL sets the distance to the bottom of the top door zone magnet. If the car passes
this point at more than 80% of contract speed, power will be cut to the valves and pump motor
to prevent hitting the stop ring at contract speed.
The following procedure describes how to set the TSRD ODL.
Navigate to MAIN MENU | SETUP | Safety. See Figure 33.
To Next Page
Loading...
Need help?
General
