Hydro:Evolved User Manual
Page 140 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
14.32 Rear Door State
The rear door state displays the current state of the car with rear door opening.
The following procedure describes how to view the state of the rear door.
Navigate to MAIN MENU | DEBUG | VIEW DEBUG DATA. See Figure 64.
From the View Debug Data menu, press the right button.
Scroll down and right until code 044 is displayed.
Figure 241: VIEW DEBUG DATA Menu – Rear Door
View the state of the rear door.
See section 14.31 Front Door State for the door state, commands, and command descriptions.
15 Car Data
The Car Data can be used to view important dispatching and car status information passed
between grouped cars. It can be used to debug dispatching issues.
15.1 Car Data Overview
The following procedure describes how to view the car status overview.
Navigate to MAIN MENU | DEBUG | CAR DATA. See Figure 65.
View the Car Data Overview.
Figure 242: Car Data Overview
The Car Data Overview shows:
Car ID – Displays the selected cars ID number. Valid from 1 to 8.
Online Status – Displays ON if the car is online and broadcasting on the group network,
otherwise it reads OFF.
Master Status – Displays [M] if the car is acting as the master dispatcher for the group.
To Next Page
Loading...
Need help?
General
