Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 149
View the VIP Flags Status.
Figure 253: VIP Flags Status
The VIP Flags menu displays the following:
• bVIP: When the setting is 1, the VIP Mode has been enabled.
• bCarCapture: When the setting is 1, the car is being captured prior to a VIP call
assignment.
• bCarReady: When the setting is 1, the car is captured and read to take a VIP call
assignment.
15.10 VIP Masks
The VIP masks displays which hall riser functions the car can serve in VIP Mode.
The following procedure describes how to view the VIP masks.
Navigate to MAIN MENU | DEBUG | CAR DATA. See Figure 65.
From the Car Data Overview (see Figure 242), press the right button.
From the Hall Mask Status (see Figure 243), press the right button.
From the Front Opening Map Status (see Figure 244), press the right button.
From the Rear Opening Map Status (see Figure 245), press the right button.
From the Front Security Map Status (see Figure 246), press the right button.
From the Rear Security Map Status (seeFigure 247), press the right button.
From the Linked Hall Mask Status (see Figure 248), press the right button.
From the Front Hall Security Map Status (see Figure 249), press the right button.
From the Rear Hall Security Map Status (see Figure 250), press the right button.
From the Hall Security Mask Status (see Figure 251), press the right button.
From the Dispatching Timers Status (see Figure 252), press the right button.
From the VIP Flags Status (see Figure 253, press the right button.
View the VIP (Front and Rear) Mask Status.
Figure 254: VIP Mask Status Menu
To Next Page
Loading...
Need help?
General
