Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 291
From the Secure Car menu, view the status of front or rear car doors that require
security access.
Figure 558: Secure Car Front Menu
Figure 559: Secure Car Rear Menu
32.11.1.2 Hall Call Security
The hall call security displays the status of the hall call security mask set on the remote
monitoring system. Each bit represents a set of four floors. For example, if floors 1 and 4 are set
for security access, then the display shows 00000009. If just floor 1 was set for security access,
then the displays shows 00000001. If no floors are set for security access, then the display
shows 00000000.
The following procedure describes how to view the hall call security status for front or rear
doors.
Navigate to MAIN MENU | STATUS | VIRTUAL INPUTS. See Figure 50.
From the REMOTE COMMANDS menu, scroll and select Hall Call Security.
Figure 560: REMOTE COMMANDS Menu – Hall Call Security
From the SECURE HALL CALLS menu, select either the front or rear hall calls.
Figure 561: SECURE HALL CALLS Menu – Front or Rear
To Next Page
Loading...
Need help?
General
