Hydro:Evolved User Manual
Page 274 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
From the PH1 EXIT DELAY menu, set the time the car remains at a landing prior to
normal operation.
Figure 524: PH1 EXIT DELAY Menu
Scroll right and press Save.
31.5.5 Ph2 Exit Delay
Phase 2 exit delay is the time a car remains in EMS Phase 2 before exiting.
The following procedure describes how to set the EMS Phase 2 exit delay.
Navigate to MAIN MENU | SETUP | EMS. See Figure 59.
From the EMS menu, scroll and select Ph2 Exit Delay.
Figure 525: EMS Menu – Ph2 Exit Delay
From the PH2 EXIT DELAY menu, set the delay time prior to the doors closing.
Figure 526: PH2 EXIT DELAY Menu
Scroll right and press Save.
To Next Page
Loading...
Need help?
General
