Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 115
From the Input menu, scroll and select the configuration to be used as the Sabbath
input.
NOTE: The X input is a representation of a number between 1-8.
Figure 160: Input Menu
Scroll right.
Scroll and select Auto Operation. See Figure 160.
Scroll right.
Scroll and select Sabbath. See Figure 160.
Scroll right and press Save.
Press the left button and navigate to SETUP | SABBATH. See Figure 59.
Is the Sabbath operation being setup for Key Enable Only or Key or Timer Enable Only?
a. If the Sabbath Operation is being setup for Key Enable Only, go to step 14.
b. If the Sabbath Operation is being setup for Key or Timer Enable, go to step 18.
From the SABBATH menu, scroll and select Key Enable Only.
Figure 161: SABBATH Menu – Key Enable Only
From the KEY ENABLE ONLY menu, press the up button and select ON.
Figure 162: KEY ENABLE ONLY Menu
Scroll right and press Save.
Press the left button until the SABBATH menu is displayed.
From the SABBATH menu, scroll and select Floors Opening (F).
Figure 163: SABBATH Menu – Floors Opening (F)
To Next Page
Loading...
Need help?
General
