Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 57
The table below lists the Setup – Sabbath, Swing, Attendant, and E-Power menu structures.
Table 21: Setup – Sabbath, Swing, Attendant, and E-Power Menu Structures
Sabbath operation options
Attendant service options
When set ON, Sabbath operations is only activated by
keyswitch input.
When set ON, Sabbath operation is activated by only the
configured Sabbath Start Time and Sabbath End Time.
When set ON, Sabbath operation is activated by either
keyswitch input or configured Sabbath Start Time and
Sabbath End Time.
Sets the Friday start time for Sabbath when timer enable
is set. Format is HHMM, for example 12:34 PM would be
1234.
Sets the Saturday end time for Sabbath when timer
enable is set. Format is HHMM, for example, 12:34 PM
would be 1234.
Sets the time car doors remain open while in Sabbath
operation
Sets the front opening floors to be serviced during
Sabbath operation
Sets the rear opening floors to be serviced during
Sabbath operation
Set which floors to stop at during Sabbath up operation
Set which floors to stop at during Sabbath down
operation
Allows swing calls to activate swing operation
Allows the car to continue to take regular hall calls while
in swing operation
If Swing mode is entered by a button press, this timer
specifies how long to remain in Swing operation once
the car is idle.