Front Suspension: 2B-12
Specifications
Service Data
B823H12207001
Suspension
Unit: mm (in)
Tightening Torque Specifications
B823H12207002
NOTE
The specified tightening torque is also described in the following.
“Front Fork Components (Page 2B-1)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-9)”.
Item Standard Limit
Front fork stroke 120 (4.7) —
Front fork spring free length 257.2 (10.13) 252 (9.9)
Front fork oil level (Without spring,
outer tube fully compressed)
100 (3.9) —
Front fork oil type SUZUKI FORK OIL L01 or an equivalent fork oil —
Front fork oil capacity (Each leg) 527 ml (17.8/18.6 US/lmp oz) —
Front fork inner tube O.D. 43 (1.7) —
Front fork spring adjuster 3rd groove from top —
Front fork damping force adjuster
Rebound 9 clicks out from stiffest position —
Compression 8 clicks out from stiffest position —
Fastening part
Tightening torque
Note
Nmkgf-mlb-ft
Front fork cap bolt 23 2.3 16.5 )(Page 2B-3)
Front fork lower clamp bolt 23 2.3 16.5 )(Page 2B-3)
Front fork upper clamp bolt 23 2.3 16.5 )(Page 2B-3)
Front fork damper rod bolt 23 2.3 16.5 )(Page 2B-8)
Front fork inner rod lock-nut 15 1.5 11.0 )(Page 2B-11)
To Next Page
Loading...
Need help?
General
