Glass / Windows / Mirrors: 9E-12
• Install rear door trim.
Rear door trim attaching order
(1) → (2) → (3) → (4) → (5) → (6)
Rear Door Window Regulator Removal and
Installation
S7RS0B9506008
Removal
1) Remove door glass referring to “Rear Door Glass
Removal and Installation”.
2) Disconnect power window motor lead wire at coupler
and loosen clamp.
3) Loosen regulator mounting screws (1), and then
remove rear window regulator (2).
Installation
Reverse removal procedure noting the following.
• Apply grease to sliding and rotating portions of
window regulator.
: Grease 99000–25011 (SUZUKI Super Grease A)
• Tighten rear door window regulator attaching screws.
Rear door window regulator screw tightening
order
(a) → (b)
Rear Door Window Regulator Inspection
S7RS0B9506009
Check the following point:
• Check regulator sliding and rotating parts.
• Check rollers for wear and damage.
“A”
1
2
3
4
5
6
“A”
“A”
“A”
“A”
“A”
“A”
I4RS0A950022-01
1
1
2
I4RS0A950023-01
(a)
(b)
I4RS0A950024-01