Tektronix MSO56 User Manual

Commands listed in alphabetical order
BUS:B1:AUDIO:
CLOCK:SOURCE?
might return
:BUS:B1:AUDIO:CLOCK:SOURC E CH1 indicating that the clock source is
set to channel 1.
BUS:B<x>:AU
Dio:CLOCk:THReshold
This command sets or queries the audio clock source threshold for the specified
bus. The bus is specified by x.
Conditions
Requires option S R-AUDIO.
Group
Bus
Syntax
BUS:B<x>:AUDio:CLOCk:THRe shold <NR3>
BUS:B<x>:AUDio:CLOCk:THRe shold?
Related Commands
BUS:B<x>:AUDio:CLOCk:SOUrce
Arguments
<NR3> is the audio clock source threshold for the specified bus.
Examples
BUS:B3:AUDIO:CLOCK:THRESH OLD 500.0E-3 sets the Bus 3 audio Cclock
source threshold to 500.0 mV.
BUS:B2:AUDIO:CLOCK:THRESH OLD? might return
:BUS:B2:AUDIO:CLOCK:THRES HOLD 1.0 indicates the Bus 2 audio clock
source threshold is set to 1.0 V.
BUS:B<x>:AUDio:DATa:POLarity
This command sets or queries the audio data source polarity for the specified
audio bus. The bus is specified by x.
Conditions
Requires option S R-AUDIO.
Group
Bus
Syntax
BUS:B<x>:AUDio:DATa:POLar ity {HIGH|LOW}
BUS:B<x>:AUDio:DATa:POLar ity?
2-120 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English