Tektronix MSO56 User Manual

Commands listed in alphabetical order
Syntax
PLOT:PLOT<x>:
SPECtrum:BASE <NR1>
PLOT:PLOT<x>:SPECtrum:BASE ?
Arguments
<NR1> is the spectrum base.
Examples
PLOT:PLOT3:SPECtrum:BASE -10 sets the base to -10.
PLOT:PLOT3:SPECtrum:BASE? might return :PLOT: PLOT3:SPECTRUM:BASE
-15
indicating the base is -15.
PLOT:PLOT<x>:SPECtrum:DYNRange
This command sets or queries the dynamic range value.
Group
Plot
Syntax
PLOT:PLOT<x>:SPECtrum:DYNR ange <NR3>
PLOT:PLOT<x>:SPECtrum:DYNR ange?
Arguments
<NR3> is the dynamic range value.
Examples
PLOT:PLOT3:SPECtrum:DYNRan ge 150 sets the dynamic range to 150 d B.
PLOT:PLOT3:SPECtrum:DYNRan ge? might return
:PLOT:PLOT3:SPECTRUM:DYNRA NGE 100 indicating the dynamic range
is 100 dB.
PLOT:PLOT<x>:TYPe
This command returns the current plot type for the selected plot.
Group
Plot
Syntax
PLOT:PLOT<x>:TYPe {NONE|BATHTUB|EYE DIAGRAM|HISTOGRA M|
PHASENOISE|SPECTRUM|SSCPRO FILE|TIEHISTOGRAM|TIETIMETREND|
TIESPECTRUM|TIMETREND|XY|X YZ}
Arguments
NONE does not create a plot.
BATHTUB creates a bathtub plot.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-527

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English