Tektronix MSO56 User Manual

Commands listed in alphabetical order
Examples
REF1_DALL:LAB
el:FONT:BOLD ON
sets the font to bold.
REF1_DALL:LABel:FONT:BOLD? might return
:REF1_DALL:L
ABEL:FONT:BOLD 0
indicating the font is not bold.
REF<x>_DALL:LABel:FONT:ITALic
This command sets or queries the italic state o f the specified digital group. The
reference is specified by x.
Group
Digital
Syntax
REF<x>_DALL:LABel:FONT:ITA Lic {ON|OFF|<NR1>}
Arguments
OFF argument turns off italic font.
ON argument turns on italic font.
<NR1> = 0 turns off italic font; any other value turns on italic font.
Examples
REF1_DALL:LABel:FONT:ITALi c 1 turns on italic font.
REF1_DALL:LABel:FONT:ITALi c? might return
:REF1_DALL:LABEL:FONT:ITAL IC 0 indicating the font is not italic.
REF<x>_DALL:LABel:FONT:SIZE
This command sets or queries the font size of the specified digital group. The
reference is specified by x.
Group
Digital
Syntax
REF<x>_DALL:LABel:FONT:SIZ E <NR1>
Arguments
<NR1> is the font size.
Examples
REF1_DALL:LABel:FONT:SIZE 16 sets the font size to 16 points.
REF1_DALL:LABel:FONT:SIZE? might return
:REF1_DALL:LABEL:FONT:SIZE 20 indicating the font size is 20 points.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-607

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English