Tektronix MSO56 User Manual

Commands listed in alphabetical order
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:INDBits
<QString>
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:INDBits?
Arguments
<QString> specifies the header Indica tor Bits.
Examples
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:INDBits "1010"
sets the header Indicator Bits to X1010.
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:INDBits? might
return
:SEARCH:SEARCH1:TRIGGER:A:BU S:FLEXRAY:HEADER:INDBITS
"XXXXX"
, indicating the Indicator Bits have not been set.
SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth
This command sets or que ries the payload length portion of the binary header
string when searching on a FlexRay bus search trigger header. The search number
is specified by <x>. The search condition must be set to HEADer.
Conditions
Requ
ires the SR-AUTO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:PAYLENgth
<QString>
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:PAYLENgth?
Arguments
<QString> specifies the header Payload Length.
Examples
SEARCH:SEARCH1:TRIGger:A:B US:FLEXRAY:HEADER:PAYLENgth "1010"
sets the Payload Length to 1010.
SEARCH:SEARCH1:TRIGger:A:B US:FLEXRAY:HEADER:PAYLENgth?might
return
:SEARCH:SEARCH1:TRIGGER:A:BU S:FLEXRAY:HEADER:PAYLENGTH
"XXXXXXX"
, indicating the Payload Length has not been set.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-673

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English